Straitjacket Buckle Page

It might not of occur to you that there is more than one way to thread the buckle on the back of a Posey Straitjacket. In fact there are a bunch of them.
standard threading 640x480 image

First the easy & "normal" one.

best threading 640x426 image

The way I like it. Probably the most secure. It doesn't use the keeper at all. This can be done two ways, but the picture would be the same. The strap can go around the pivot both directions. If you go "in" on the far side of the pivot before coming back out under the original strap, it is very difficult to thread the buckle.

best 640x480 image

The same arrangement but with the strap loose so you can see its path.

Keeper loopback 609x387 image

Instead of using the pivot as a keeper before being threaded back this combination uses the normal keeper.

Pivot loopback 640x480 image

This threading pattern uses the pivot instead of the keeper. The strap is quite loose so that you can see how it is threaded.

too much trouble 640x480 image

This threading pattern is just more work than useful. The strap comes in to the buckle the "normal" way, loops under the pivot pin, then through the keeper, and finally, back out the way it came in.

cloth keeper 589x283 image

The jacket also has a cloth keeper past the buckle. For completeness here is a picture of it.

Posey clip 640x480 image

This picture shows a "Posey Clip". It clips on to the strap after it passes through the buckle. It makes it a bit harder to get a buckle undone. I don't think Posey makes them any more.

This page has been accessed 40396 times since Jan 14, 2001.
Please mail me your comments and suggestions at: louis@sj.blacksteel.com

Thanks Yossie, for hosting my page at blacksteel.com